Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

SULPHOCHROMIC PICKLING - BATH COMPOSITION

I NEED TO KNOW THE COMPOSITION OF A SULPHOCHROMIC BATH FOR TREATMENT OF ALUMINUM SURFACES.

AHMED SAUD KHAN
WINGS & WHEELS - RAWALPINDI, PAKISTAN
2002

2005

Sulphochromic bath contains sulfuric Acid and Chromic Acid solutions in De-mineralized water. This bath is heated to about 70 °C and used as a pickle bath during anodizing process. i.e., it removes the oxidation from aluminium surface. Parts are dipped for a very short time, rinsed thoroughly (preferably in demin water) and then loaded in anodizing bath for anodizing.

Najeeb
Karachi

Muhammad Najeeb
Aviation Maintenance - Karachi, Pakistam

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: