No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Metal Ring Removal From Glass

2002

To dissolve cured epoxy to remove a metal ring with handle from the neck of an antique glass biscuit jar. Can it be done?

Thanks,

Weston Barrett
- Quartz HIll, California, USA

Yes, it can be done by using mixtures of solvents like acetone ⇦ this on eBay or Amazon [affil links] Warning! highly Flammable! , methanol [affil links], ethanol and some aromatic solvents. But care must be taken since majority of this chemicals are highly toxic and flammable.

Ronnie Casenas
- Philippines
2003

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: