No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Alodine 1200 do we need a electrolytic bath

Do we need an electrolytic bath for coating Alodine 1200 on to surface of aluminum.Will a dip be suffice for Alodine 1200 to give a yellowish colour.

Regards,

Suresh Venkataraman
Vallabha Industrial Chemical Engineers - Vadodara, Gujarat, India
2002

You have mentioned a specific trade name, so you should talk to the supplier of that product. But in general, chromate conversion coating does not use electricity; of course, there are many other steps required than simply dipping in the chromate solution.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2002

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: