No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Copper powder

We require method to stabilize copper powder (electrolytic) against atmospheric oxidation after annealing.

Manish Sarda
- Jaipur, India
2002

It's possible that sodium benzotriazole ⇦ this on eBay or Amazon [affil links] or sodium dichromate will solve your problem--they are helpful for treating larger masses of copper. But remember that the enormous surface area involved when working with a powder can have a dramatic effect on the otherwise expected chemical reactions! Some reactions which proceed slowly with sheet material proceed almost explosively when working with powder. Exothermic reactions actually may be explosive when powder is involved.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2002

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: