No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Finishing Lead Castings

I am working with cast lead, (97% lead 3% antimony). I wish to develop a finish that is similar in color and texture to the natural patina that forms over time, which is a silvery grey lead sulphate. Cold black oxidizing works to some extent but is generally too dark even if it is time controlled and it leaves a somewhat smutty finish. Any suggestions would be appreciated.

Richard Davies
- Ottawa, Ontario, Canada
2002

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: