Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Silver-copper alloying research

2002

I am doing research into plating alloys of silver and copper. Many complexant agent for copper in Cu(I) state have been tried, and solvent modification has too. A reader maybe has a solution or idea ? Abdullah Makky
- Gresik, JATIM, INDONESIA

Presumably you have tried cyanide because it is a workable electrolyte for silver plating and for copper plating, and it acts as a complexing agent.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2002

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: