Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Problem with Aluminum extrusion

I have a problem in removing Aluminum after hot extrusion, from the Die tool. Now I immerse the die tool in Caustic soda solution for 3-4 hours then I go for laborious work like chipping etc. which I don't want to got for. Can anybody help me in solving the problem? The die tool is made up of H13 steel.

Sathya Prakash M
Pyro Technologies - Bangalore, Karnataka, India
2002

Add 4 oz/gal Sodium Gluconate to the Caustic Soda Solution.

Robert H Probert
Robert H Probert Technical Services

Garner, North Carolina

2002

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: