Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Polymer coating of NiTi

Is there standard techniques for polymer coating NiTi, specifically medical grade polyurethanes?

James Hong
- Sunnyvale, California, USA
2002

We have been doing this for several years. There is no standard process that we are aware of. Our process involves electropolishing the surface of the NiTinol and then placing a layer of Polyurethane on the surface. We have used this process for medical guidewires and other applications that require a polymer surface on nitinol parts.

Thomas F. Lachner
Lightek Corporation - Waukegan, Illinois, USA
2002

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: