Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Electrophoretic Polyurethane Coating Required

Q. We are looking for an electrophoretic polyurethane coating system that is UV resistant.

It should be able to be dyed brass, gold, copper etc.

I have heard they exist with very good UV resistance and after approval testing, we would be looking to use large quantities of chemicals.

Polyurethane is chosen from advice, but please correct us if we have been mislead.

The coating should be flexible and suitable for a 10 micron application.

Mark Bradey
lead co., Rotherham, England
1998

A. Izolat is Bulgarian private company for production of fiberglass sleeves with polyurethane and silicone lacquers.

Dear sirs, our company is looking for polyurethane lacquer with good adhesion for impregnation or coating of fiberglass textile.The lacquer after vulcanization most be a flexible and have a hardness to Shore-50 max.If you offer temperature cured or two component lacquers we need some more information details. We're looking forward your answer.

Yours faithfully,

Jordan Pentchev
manager- Bulgaria. Rousse
1999

da ted_yosem

Ted Mooney, P.E. RET
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: