Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Hard anodizing processes

I will appreciate if some one could help me with information on the following hard anodizing processes:

Scionic, Alpha and Imperv-X

Jean Rasmussen
- Rasmusen
1998

1998

We run the Imperv-x process & have been using it for 40+ years. It is great for coating hi copper alloys & for parts with sharp edges.

We also run the Mod Martin process for most of our "normal" Hardcoat work.

We have evaluated the Alpha process & we were not very impressed.

One of the newer processes we are using is the Anodal EE - and that is very impressive.

David A. Kraft
- Long Island City, New York

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: