Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Lead

I'm working on our old tin ceiling at the moment. With a heat gun ⇦this on eBay or Amazon [affil links] and stripper. But what about the lead which you find often in old paintings? Is that safe while I'm working with the heat gun?

Miriam Netten
- Kingston, Ontario, Canada

I would definitely avoid breathing any of the fumes generated by the heat...lead fumes are nasty stuff

Marc Green
anodizer - Boise, Idaho

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: