No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Need experience, cyanide free Cu and Ag plating

Who has practical experience in using E-Brite 30/30 and E-Brite 50/50 (EPI / Electrochemical Products Inc. [a finishing.com supporting advertiser])? They are new cyanide-free copper and silverplating processes. We would like to use it and need more practical information.

Andrij Abrosimov
- Kokkola, Finland

Hi,

The substrate is very important. Lead is toxic to the non cyanide bath. What is substrate. Rack or Barrel What prep do you go through prior to bath.

Ken Fefferman
- Harwood Heights, Illinois

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: