Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Process for Bronze (stain) on stainless steel shims

I am looking for a process to color about 1.5 million stainless steel shims of various thicknesses, 0.008-0.010 thick, about 1" diameter. I have seen a bronze color on similar material which would be perfect. Any details on such a process, material finishes and/or vendors would be appreciated. Peter.

Peter J [last name deleted for privacy by Editor]
NY, New York

This can be done by electrolytic anodization of the stainless or by PVD application of titanium nitride, Peter.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: