Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Anodizing/Iriditing standards

I would like to review the standards that illustrates the criteria/ specifications for the surface finishing technologies such as Iriditing and Anodizing for Aluminum surfaces. Please advise.

Thanks,

Ramana Somu
mini circuits - Brooklyn, New York

Start with MIL-C-5541 for chromate conversion coating and MIL-A-8625 / MIL-PRF-8625 [on DLA] for anodizing.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

Are ASTM anodizing standards more recognized than Mil Spec? If so what is the basic equivalent to Mil-A-8625 Ty2 CL2?

Angelo Valenti
medical lasers mfr - Wayland, Massachusetts

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: