Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Aluminium anodising

I am interested in starting an aluminium anodising plant at my factory in South Africa but only have a very basic knowledge of the process. Is there some where on line that I am able to get information about building an anodising plant?

Sean Daly
- Pietermaritzburg, South Africa

Aluminum How-To
"Chromating - Anodizing - Hardcoating"
by Robert Probert

Also available in Spanish

You'll love this book. Finishing.com has sold almost a thousand copies without a single return request :-)

"The Surface
Treatment &
Finishing of
Aluminium and
Its Alloys"
by Wernick, Pinner
& Sheasby
pinner

(note: this book is two volumes)

on eBay or

AbeBooks

or Amazon

(affil links)

Hi, Sean. You can assemble pieces from a few sources and make some progress. But you could also take a training course, hire a consultant, or buy an anodizing book (preferably all three). It takes years of effort to write a book, and nobody works for years without compensation, so you won't find the equivalent of a "book" about this on line. Good luck.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: