Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Automotive finishing specs

Greetings Ted and the rest of the metal finishing community!

Does anyone know of a good website to find info on automotive specs dealing with metal finishing (specifically anodizing)? I'm trying to find Ford ESB-M4P7A and GM 4472. Thanks for the help!

Vic Waldman
metal finishing shop - Naugatuck, Connecticut

Hi, Vic. Sorry to report that to the best of my knowledge automotive specs are not available on line, you need to get them from a buyer.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

OEM specifications are available on-line, but your company must pay for this service. That is how my company does it right now. You can always try asking your customer for these specifications, too.

Tim Neveau
Rochester Hills, Michigan

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: