Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Disc rebuild

I would like to know if there is a way of rebuilding brake discs/rotors with a ceramic spray or any other way. At the moment I skim the discs on the car but I would like to change the whole system.

Thanks,

Viv Grimbeek
Mobi Skim - Cape Town

Rotors could be flame sprayed and remachined, but rotors are so cheap, I doubt it would be worth it.

Michael Brewington
- Salisbury, Maryland, USA

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: