Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Seeking gun for 2-part silvering

Dear Mr./Mrs.,

We are designing an electroforming system so we can lay nickel on ABS material. The first step of course is to make the plastic conductive so a special paint (silver lay + reductor) is needed in order to cover it.

We are looking for a double nozzle gun so we can spray at the same time the chemical silver lay and the reductor.

Could you give me enterprises who have it (best if european) or alternative options?

Regards

M. Eduardo P [last name deleted for privacy by Editor]
University of Las Palmas de Gran Canaria - Las Palmas de Gran Canaria, Canary Islands, Spain
2001

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: