Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

Cleaning cycle for Electroless Nickel Plating of 42CrMo4

July 10, 2014

Q. Hello,

1. I have a customer who has come to me with a job made from 42CrMo4.
2. They are to be plated with Electroless nickel.
3. The issue is that he does not want us to use pickling as part of the cleaning cycle.
4. If any one has any idea, please let me know.

Thank you.

Ravi Patel
- Anand, India

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: