No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Typical paint thickness tolerances

I am working on a research project that is seeking to improve the accuracy of paint spraying. We would like to know typical paint thickness tolerances in the automotive and aerospace industries.

Noelle Steber
university student - Cambridge, Massachusetts
2006

Hello, the question better served might be what is the typical paint thickness of the paint types that are used in these industries, and what are the application methods. A lot of the information your asking for would probably be considered proprietary and you won't be obtain it.

Sheldon Taylor
supply chain electronics
Wake Forest, North Carolina
2006

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: