No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Satellite designer needs outgassing data for Iridite 7p

2004

I am planning to use Iridite 7p per MIL-C-5541 to coat my copper waveguide. The issue is that those waveguides have to go in a thermal vacuum chamber so the outgassing of the coating must be low.

Does anyone know if that coating has already been used for a space application or/and where I could find some outgassing data (I went to the NASA website http://outgassing.nasa.gov but nothing is there).

Best regards,

Franck Borde
satellite designer - Montreal, Quebec, Canada

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: