No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Non leaking, jellifying or solidifying filling material

I have a liquid, that liquid is made from saturated saline ethanol (potassium iodide, glycol, demineralised water) and I need to change it to a jelly/solid by adding something to it.? To make it Solid enough to prevent any leakage if put in a container that may have a crack in it. Any Suggestions?

Ali .R
Student - Southampton, England
2004

Look up 'Fumed Silica [affil links]', Ali, and see if that meets your needs.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2004

You can use any cellulose based wallpaper glue!

Good luck!

Goran Budija
- Cerovski vrh Croatia
2004

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: