Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Kanigen plating and its vendors

I would like to know the following:

1. What is kanigen plating and what is INDIAN equivalent standard for it?

2. Who are the parties involved in kanigen plating in INDIA?

3. life of kanigen plating of twin lobe blowers ?

4. Benefits of kanigen plating?

Praveen Asthana
chemical engineer - Gwalior, M.P., INDIA
2004

Hi, Praveen

Kanigen was an early, but currently little used, brand name for electroless nickel. You are probably looking for an electroless nickel plating service. Good luck.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey
2004

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: