Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Painting a blued gun

I have a gun has reblueing and some reason I have to paint the gun. What type of paint should I use to not hurt blueing? Also, Can I use paint remover or paint thinner when I remove paint later? I wonder do those chemical hurt blueing or not? Can anybody help me this unusual question?

Ken Okazaki
hobbyist - Los Angeles, California, USA
2004

Dear Ken!

You can use paint thinner or acetone ⇦ this on eBay or Amazon [affil links] Warning! highly Flammable! or any similar solvent. Forget paint stripper. You can use acrylic or nitro-cellulose based paint.

Good luck!

Goran Budija
- Cerovski vrh Croatia
2004

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: