Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

The authoritative public forum
for Metal Finishing since 1989
-----

What is NH35?

What is NH35, its now being used on thixomolded magnesium before powder coating. Also why is it required.

Dave Burrows
- Colorado Springs, CO, USA
2003

"Magnesium Technology"

on AbeBooks

or Amazon

(affil links)

NH35 is a type of chromate conversion coating used for magnesium die castings. It was developed by Norsk Hydro as a pretreatment for subsequent painting. It provides for better adhesion, as well as enhanced corrosion resistance. None of the chrome-free pretreatments (Alodine 5200, etc.) have been able to meet the same corrosion performance that NH35 provides.

Toby Padfield
Automotive module supplier - Michigan
2003

adv.
this text gets replaced with bannerText

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: