No passwords, No popups, No cost, No AI:
we earn from 'affiliate link' purchases, making the site possible

Sound technical content, curated with aloha by
Ted Mooney, P.E. RET
Pine Beach, NJ

finishing.com -- The Home Page of the Finishing Industry

  The authoritative public forum
  for Metal Finishing since 1989

-----

Electroplating the Gold Emblems on Cars

Hi,

I am thinking of buying a electroplating system to gold plate emblems on cars. Can you please tell me the detailed good and bad information on this type of work?

Thanks,

Dejan Pencov
- Melbourne, Victoria, Australia

The bad news is that the customers will not beat a path to your door, Dejan, you'll have to dig them up. So why not try your skills at finding the customers, acting as a rep for someone else, before making the investment? Good luck.

Ted Mooney, P.E.
Striving to live Aloha
finishing.com - Pine Beach, New Jersey

The Plating Hobby can be very fulfilling. It takes a lot of patience. If you have some things you would like to plate go ahead and start on a small basis till you get a feel and then expand out.

Clinton Driggars
- CELINA, Texas

(No "dead threads" here! If this page isn't currently on the Hotline your Q, A, or Comment will restore it)

Q, A, or Comment on THIS thread -or- Start a NEW Thread

Disclaimer: It's not possible to fully diagnose a finishing problem or the hazards of an operation via these pages. All information presented is for general reference and does not represent a professional opinion nor the policy of an author's employer. The internet is largely anonymous & unvetted; some names may be fictitious and some recommendations might be harmful.

If you are seeking a product or service related to metal finishing, please check these Directories: